Nortel 2340 Configuration Manual page 42

42 Nortel WLAN Location Engine 2340 Web GUI
• Label
• Type
• Network Info
• Locale
• MAC Address
• IP Address
• Last Seen
For example, clicking on the Device Type column causes the devices to be sorted by device type:
• Access Points first
• Clients second and so on.
• Eliminate Active/Inactive: Reduce the scope of the list from 'All Devices' to either 'Only Active Devices' or 'Only
Inactive Devices'. An active device is one which is powered on and has transmitted within the time specified by the
Inactivity Time parameter (140 seconds).
Once a device of interest has been located on the page, the user can:
• See more detail for a device: Select the
• See history for a device: Select the
• Edit a device's information: Select the
• See other clients on same Access Point: For each CLIENT device associated with an Access Point, the MAC
address shown in the Network Info Column is a link. Click on the MAC address to redisplay the Monitor Device
List page showing just the devices communicating with that Access Point.
For example, see below the Device List page filtered to include only active devices that contain the text 'Labs' in any
column:
To edit device information, use the Device Information dialog.
Using the Device Information dialog to assign a Device Label
1
Select Monitor>Device List page.
NN47250-504 (324122-A Version 01.01)
next to the device's label to display the Device Detail page.
next to the device's label to display the Device History page.
next to the device's label to display the Device Information dialog.