•
Networks - Shows the networks tracked by the server.
Note.
automatically saved and are re-established automatically on start up. It will prompt for
password during re-connect if the Save password check box was not checked during login.
Device lists
Once the connection is established from the Nortel WLE2340 Dashboard to a Nortel WLAN Location Engine, you
following table immediately appears:
The Device List presents a comprehensive summary of the each device as follows:
•
label
•
device type
•
network info
•
group
•
channel
•
locale
•
MAC address
•
IP address
•
Activity
A Device List can be displayed for any of the following by right clicking on the name in the Connections panel and
selecting View Devices from the context menu:
•
Server: All devices being tracked (i.e. on all networks and in all locales).
•
Locale: Just the devices in the selected locale.
•
Network: Just the devices in the selected network
By default, all powered devices within range of the specified wireless network are listed. The list can also be filtered to
show just active or inactive devices. (An active device is one that is powered on and has transmitted within the period
specified by the Inactivity Threshold parameter, by default 140 seconds).
Label refers to the name assigned to the device in the Nortel WLE2340; if name was not assigned, then the default label
will be MAC address. Device Type can be Client, Access Point, Ad Hoc or UNKNOWN. Network Info displays the
When you close the Nortel WLE2340 Dashboard, the connection will be
Nortel WLAN - Location Engine 2340 Configuration - Using Interfaces
Nortel WLAN Location Engine 2340 Dashboard 55