Associated Agent - Nortel 2340 Configuration Manual

28 Nortel WLAN Location Engine 2340 Web GUI
4
Click Save to keep the changes.
To add a Location AP
It may be necessary to manually add a Location AP.
1
Click Add. The window appears on the right hand pane.
2
Enter the Name, Description and IP Address.
3
Click Save.
To remove a Location AP
1
To remove a Location AP, highlight the name of the Location AP from the list.
2
Click Remove.
Note.
Performance can suffer if there are Location APs listed that are no longer
reporting. Keep the Location AP list up to date with the actual Location APs that are
reporting back to the Nortel WLAN Location Engine.

Associated agent

The Nortel WLAN Location Engine has one Agent process and all Location APs can be associated with it automatically.
However, it may be necessary to configure this manually.
Assigning Location APs to an Agent on the Tracking Agents
1
Select Configuration>Agent. The Agent Information panel updates to include the information for the
selected Agent. The following window appears.
NN47250-504 (324122-A Version 01.01)