104
Chapter 4 Configuring and graphing ports
Figure 31 Port dialog box—ARP tab
4
5
6
7
Note:
behavior on a brouter port. To configure the ARP response for a routing
VLAN, use VLAN > VLANs > Basic > IP > ARP. The ARP dialog box is
not applicable unless the port or VLAN is routed, that is, it is assigned
an IP address.
Table 17
Table 17 ARP tab fields
Field
DoProxy
DoResp
314723-D Rev 01
In the DoProxy field, click enable to enable Proxy ARP function.
In the DoResp field, click disable or enable to select whether or not to respond
to an ARP.
Click Apply.
Click Close.
Use the ARP dialog box when setting the ARP response
describes the ARP tab fields.
Description
Proxy ARP allows the 8000 switch to respond to an ARP
request from a locally attached host or end station for a
remote destination.
Sets the Proxy ARP option to respond to an ARP request.