182
Chapter 5 Configuring and graphing chassis information
Table 52 Serial Port dialog box fields (continued)
Field
SlipMtu
SlipTxRxCompress
SlipRxCompress
PppConfigFile
Editing fans
The Fan dialog box provides read-only information about the operating status of
the switch fans.
To view the fan information:
1
2
To open the Fan dialog box:
1
2
314723-D Rev 01
Description
Specifies the MTU for this port.
Enables or disables compression of TCP/IP packet headers on
this port. Used for "slip" mode only.
Enables or disables compression for receiving packets on this
port. Used for "slip" mode only.
Specifies the configuration file to use PPP.
Select the fan object.
Do one of the following:
•
Double-click the fan object.
•
Right-click the fan object and click Edit.
•
From the Device Manager menu bar, choose Edit > Fan.
•
From the Device Manager menu bar, choose Edit > Select All > Fan.
Then choose Edit > Fan.
•
On the Device Manager toolbar, click the Edit Selected button.
Select the Fan object.
From the Device Manager menu bar, choose Edit > Fan.
The Fan dialog box opens
(Figure 73 on page
183).