Table 34 RMON History tab fields (continued)
Field
Fragments
Collisions
Graphing DCHP statistics
To graph DHCP statistics for a single port or multiple ports:
1
2
3
Figure 51 Port dialog box—DHCP tab
4
Description
The total number of packets received that were less than 64 octets in length
(excluding framing bits but including FCS octets) and had either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a nonintegral number of octets (Alignment Error). It is entirely normal
for etherStatsFragments to increment because it counts both runts (which are
normal occurrences due to collisions) and noise hits.
The best estimate of the total number of collisions on this Ethernet segment.
On the device view, select a port or multiple ports.
From the Device Manager menu bar, choose Edit > Port.
The Port dialog box opens with the Interface tab displayed.
Click the DHCP tab.
The DHCP tab opens
Click Enable to select the DHCP option.
Chapter 4 Configuring and graphing ports
(Figure
51).
Configuring Network Management
143