Figure 49 Graphport Dialog Box-Rmon Tab - Nortel Passport 8600 Configuring

Figure 49 GraphPort dialog box—RMON tab
10.10.40.34
8
9
10 Click the Graph button (bar, pie, chart, line).
Table 33
Table 33 RMON tab fields
Field
Octets
Packets
BroadcastPkts
MulticastPkts
CRCAlignErrors
Select the statistic(s) you want to graph.
In the Poll Interval box, select the polling interval.
describes the fields in the RMON tab.
Description
The total number of octets of data (including those in bad packets) received on
the network (excluding framing bits but including FCS octets). You can use this
object as a reasonable estimate of Ethernet utilization. For greater precision,
sample the etherStatsPkts and etherStatsOctets objects before and after a
common interval.
The total number of packets (including bad packets, broadcast packets, and
multicast packets) received.
The total number of good packets received that were directed to the broadcast
address. Note that this number does not include multicast packets.
The total number of good packets received that were directed to the multicast
address. Note that this number does not include packets directed to the
broadcast address.
The total number of packets received that had a length (excluding framing bits
but including FCS octets) of between 64 and 1518 octets inclusive, but had
either a bad Frame Check Sequence (FCS) with an integral number of octets
(FCS Error) or a bad FCS with a nonintegral number of octets (Alignment Error).
Chapter 4 Configuring and graphing ports
Configuring Network Management
139