Editing trap receivers
You can edit how machines will receive SNMP traps by editing the community
strings and the SNMP version format.
When Device Manager opens a device, it automatically adds the machine on
which it is running to the Trap Receivers list only if the
box on the Properties dialog box is checked.
Note:
of a trap receiver cannot be resolved to a DNS name. By default, Device Manager
attempts to resolve IP addresses to DNS names.
To edit how traps will be received:
1
2
Figure 62 Chassis dialog box—Trap Receivers tab
Chapter 5 Configuring and graphing chassis information
If the Trap Receivers tab takes a long time to open, it may be that the IP address
From the Device Manager menu bar, choose Edit > Chassis.
The chassis dialog box opens with the System tab displayed.
Click on the Trap Receivers tab.
The Trap Receivers tab opens
(Figure
62).
Configuring Network Management
Register for Traps
163