Enabling L2/L3Static Routes; Figure 57 Chassis Dialog Box-L2/L3 Redundancy Tab - Nortel Passport 8600 Configuring

Enabling L2/L3static routes

Note:
After you enable or disable the high availability feature, the bootconfig is saved
onto the master and the standby CPU and the standby CPU is reset automatically.
However, you need to manually reset the master CPU.
To enable static routes:
1
From the Device Manager menu bar, choose Edit > Chassis.
The Chassis dialog box opens with the System tab displayed.
2
Click on the L2/L3 Redundancy tab.
The L2/L3 Redundancy tab opens
Figure 57 Chassis dialog box—L2/L3 Redundancy tab
3 Click Enable.
4
Click Apply.
The enable HA-CPU message box opens
Chapter 5 Configuring and graphing chassis information
(Figure 57).
(Figure 58 on page
Configuring Network Management
157
.
158)