Table 47 Topology Table Tab Fields - Nortel BayStack 380-24F Reference

Table 47 describes the Topology Table tab fields.

Table 47 Topology Table tab fields

Field Description
Slot The slot number in the chassis in which the topology message
was received.
Port The port on which the topology message was received.
IpAddr The IP address of the sender of the topology message.
SegId The segment identifier of the segment from which the remote
agent sent the topology message. This value is extracted from the
message.
MacAddr The MAC address of the sender of the topology message.
ChassisType The chassis type of the device that sent the topology message.
BkplType The backplane type of the device that sent the topology message.
LocalSeg Indicates if the sender of the topology message is on the same
Ethernet segment as the reporting agent.
CurState The current state of the sender of the topology message. The
choices are:
•
•
•
Reference for the BayStack 380-24F Gigabit Switch Management Software
Chapter 7 Troubleshooting Device Manager 121
topChanged —Topology information has recently changed.
heartbeat —Topology information is unchanged.
new — The sending agent is in a new state.