Nortel Passport 8600 Configuring page 218

218 Appendix A RMON alarm variables
Table 65 Alarm variables (continued)
Category Subcategory
RIP
OSPF
314723-D Rev 01
Variable
rcSysSwitchFabric
Util.0
rcSysBufferUtil.0
rcSysNVRamUsed.0
rcSysLastChange.0
rcSysLastVlan
Change.0
rcSysLastSaveTo
NVRam.0
rcSysLastSaveTo
StandbyNVRam.0
rip2GlobalRoute
Changes.0
rip2GlobalQueries.0
rip2ifStatSentUpdates
ospfExternLSACount.0 The number of external (LSA type 5) link-state
ospfOriginateNew
LSAs.0
ospfrxNewLSAs.0
ospfSpfRuns
ospfAreaBdrRtrCount
ospfASBdrRtrCount
ospfAreaLSACount
ospfIfState
Definition
Percentage of switching fabric utilization.
Buffer utilization as a percentage of the total amount
of buffer space in the system. A high value indicates
congestion.
Nonvolatile RAM (NVRAM) in use in kilobytes.
Last management-initiated configuration change since
sysUpTime.
Last management-initiated VLAN configuration
change since sysUpTime.
SysUpTime of the last time when the NVRAM on the
CPU board was written to.
SysUpTime of the last time when the standby NVRAM
(on the backup CPU board) was written to.
The number of changes made to the IP Route
database by RIP.
The number of responses sent to RIP queries from
other systems.
The number of triggered RIP updates actually sent on
this interface.
advertisements in the link-state database.
The number of new link-state advertisements that
have been originated. The number is incremented
each time the router originates a new LSA.
The number of link-state advertisements received
determined to be new installations.
Indicates the number of SPF calculations performed
by OSPF.
The total number of area border routers reachable
within this area.
The total number of autonomous system border
routers reachable within this area.
The total number of link-state advertisements in this
area's link-state database.
This signifies that there has been a change in the
state of an OSPF virtual interface.