Table 16 Test Tab Fields - Nortel Passport 8600 Configuring

Table 16 Test tab fields

Field
Result
Code
PassCount
FailCount
Chapter 4 Configuring and graphing ports
Description
The result of the most recently run (or current) test:
• None
• Success
• InProgress
• NotSupported
• unAbleToRun
• Aborted
• Failed
The code contains more specific information on the test result
(for example, an error code after a failed test):
• NoReceive (timeout on a send)
• BadSeq (packets received out of sequence)
• BadLen (packet length mismatch)
• BadData (packet data mismatch)
This object contains a code which contains more specific
information on the test results, for example an error-code after a
failed test. Error codes and other values this object may take are
specific to the type of interface and/or test. The value may have
the semantics of either the Autonomous Type or InstancePointer
textual conventions as defined in RFC 1443. The identifier:
testCodeUnknown OBJECT IDENTIFIER :={0 0} is defined for
use if no additional result code is available.
The number of iterations of the loopback test completed
successfully.
The number of iterations of the loopback test failed.
Configuring Network Management
101