98
Chapter 4 Configuring and graphing ports
Setting rate limits
You can set the rate limit of broadcast or multicast packets for a port.
To set the rate limit:
1
2
3
Figure 29 Port dialog box—Rate Limiting tab
Table 15
Table 15 Rate Limiting tab fields
Field
Index
TrafficType
314723-D Rev 01
On the device view, select a port or multiple ports.
From the Device Manager menu bar, choose Edit > Port.
The Port dialog box opens with the Interface tab displayed.
Click the Rate Limiting tab.
The Rate Limiting tab opens
describes the Rate Limiting tab fields.
(Figure
29).
Description
The port number.
The type of traffic being rate limited—either broadcast or
multicast traffic.