Nortel Passport 8600 Configuring page 59

config rmon
followed by:
ether-stats create
<id> <ports> [owner
<value>]
ether-stats delete
<id>
ether-stats info
ether-stats owner
<id> <name>
event create <id>
trap_src <value>
trap_dest <value>
[desc <value>]
[type <value>]
[community <value>]
[owner <value>]
event delete <id>
event info
Chapter 2 Configuring RMON
Creates an ether-stats control interface.
• id is the index number of the ether stats control interface
(0 to 65535).
• ports is the single port interface {slot/port[-slot/
port][,...]}.
• owner <value>
to 48).
Deletes an ether-stats control interface.
• id is the index number of the ether stats control interface
(0 to 65535).
Displays the current ether-stats settings.
Changes the owner name for the ether-stats control
interface.
• id is the index number of the ether stats control interface
(0 to 65535).
• name is name of the owner (string length 1 to 48).
Creates an event.
• id is the event index number (0 to 65535).
• trap_src <value>
• trap_dest <value>
address.
• desc <value> is the event description (string length 0
to 127).
• type <value> is the event type,
snmp-trap , or log-and-trap
• community <value>
length 1 to 127).
• owner <value>
1 to 48).
Deletes an event.
• id is the event index number (0 to 65535).
Displays the event information.
Configuring Network Management
is name of the owner (string length 1
is the trap source IP address.
is the trap destination IP
none , log
.
is the event community (string
is the name of the owner (string length
59
,