CC MIS
CC MIS
Wallboard Messages
You can send a "quick message" to the wallboard by completing the Quick
Message fields and sending the message.
The Walboard Message Definition display is shown in the figure below.
Wallboard
message
definition
screen
Wallboard Message Definition screen fields
Text field - Messages must not exceed 100 characters (this includes five pa-
rameters that represent values from formulas). The character sequence <1>,
<2>, ... <5>, <G>, <T>, <D> in the message text refers to the variables.
Multiple lines can be defined for the message using line breaks "\n". A line
break counts as two of the 100 characters allowed for the message.
Color, Style, Display fields - The display formats describes how the message
is displayed on the wallboard. Click on the Down Arrow to select a format
in each field.
Click next to desired optional settings such as Double-high or Double-wide
options. (The display formats that you can use depend on the type of wall-
board in use.)
Variable tabs - Contains a tab for each of the variables that can be defined
within a message. Variables represent formulas that are based on real-time
statistical data collected by the system. Choose up to five formulas to dis-
play on the wallboard <1> thru <5>. The formulas available on the wall-
board are the Queue Statistics display formulas, 10-min window, 24 hour,
and Shift statistics. Click on the Down Arrow to view available options.
Page 7-2
Release 5.2
CC MIS Getting Started Guide (297-2671-175)