Configuring Virtual Router Redundancy Protocol (Vrrp) - Nortel Passport 8600 Configuring

Table 24 PGM tab fields
Field
NakRdataInterval
NakEliminateInterval

Configuring virtual router redundancy protocol (VRRP)

To configure VRRP:
To discover a router on a port:
1
2
Figure 39 Port dialog box—VRRP tab
3
From the Device Manager menu bar, choose Edit > Port.
The Port dialog box opens with the Interface tab displayed
page 81).
Click the VRRP tab.
The VRRP tab opens
Click Insert.
Chapter 4 Configuring and graphing ports
Description
Specifies how long to wait for RDATA (in milliseconds)
after receiving an NCF. The default is 10000
milliseconds.
Specifies the length of time (in milliseconds) during
which a network element (NE) eliminates duplicate
NAKs. When this interval expires, the NE suspends
NAK elimination until the first duplicate arrives. Once
this NAK is forwarded, the NE once again eliminates
duplicate NAKs for the specified interval. This
parameter must be less than NakRdataInterval. The
default is 5000 milliseconds.
(Figure 39).
(Figure 20 on
Configuring Network Management
119