Editing Management Port Route Table - Nortel Passport 8600 Configuring

178 Chapter 5 Configuring and graphing chassis information
Table 50 Mgmt Port dialog box fields (continued)
Field
MgmtMacAddr The MAC address of the management device.
Addr
Mask
AutoNegotiate The autonegotiate value.
AdminDuplex
OperDuplex
AdminSpeed
OperSpeed
EnableBootp

Editing management port route table

You can use the Mgmt Port Route Table dialog box to view and specify network
and gateway IP addresses used to remotely manage the device.
To open the Mgmt Port Route Table dialog box:
1
2
3
314723-D Rev 01
Description
The IP address of the device.
The subnet IP mask.
Specifies the administrative duplex setting for this port.
The operational duplex setting for this port.
Specifies the administrative speed setting for this port.
Indicates the operational duplex setting for this port.
Enables or disables BootP.
Select the management port object.
From the Device Manager menu bar, choose Edit > Mgmt Port.
The Mgmt Port dialog box opens
On the Mgmt Port dialog box, click Route.
The Mgmt Port Route Table dialog box opens
(Figure 70 on page 177).
(Figure 71 on page 179).