Figure 1-36. Vlan Configuration Screen Example - Nortel BayStack 450-24T Using Manual

Using the BayStack 450 10/100/1000 Series Switch
Ports 2, 4, 6, 8, 10, and 11 are now untagged members of VLAN 3 as shown in
Figure 1-34 on page 1-62.
Create VLAN:
Delete VLAN:
VLAN Name:
Management VLAN: [ Yes ]
1-6
------
Unit #1 -U-U-U
KEY: T = Tagged Port Member, U = Untagged Port Member, - = Not a Member of
VLAN
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 1-36. VLAN Configuration Screen Example
To configure the PVID (port VLAN identifier) for Port 8:
1.
2.
The VLAN Port Configuration screen settings shown in Figure 1-37 are default
settings.
1-64
VLAN Configuration
[ 3 ]
[ ]
[ Glenn's VLAN ]
Port Membership
7-12
------
-U-UU-
From the VLAN Configuration screen, press [Ctrl]-R to return to the
VLAN Configuration Menu.
From the VLAN Configuration Menu, select VLAN Port Configuration
(or press c).
The default VLAN Port Configuration screen opens (Figure 1-37).
VLAN Type:
Protocol Id (PID): [
User-Defined PID:
VLAN State:
Press Ctrl-C to return to Main Menu.
[ Port-Based
None
[ 0x0000 ]
[ Active
309978-D Rev 01
]
]
]