Figure 3-44. Spanning Tree Port Configuration Screen (1 Of 2) - Nortel BayStack 450-24T Using Manual

Using the BayStack 450 10/100/1000 Series Switch
Spanning Tree Port Configuration
The Spanning Tree Port Configuration screen allows you to configure individual
switch ports or all switch ports for participation in the spanning tree.
Note: If spanning tree participation of any trunk member is changed (enabled
or disabled), the spanning tree participation of all members of that trunk is
changed similarly.
Figures 3-44 and 3-45 show sample port configurations for the two Spanning Tree
Port Configuration screens.
Choose Spanning Tree Port Configuration (or press c) from the Spanning Tree
Configuration Menu to open the Spanning Tree Port Configuration screen.
Port Trunk
---- ----- -------------------
1 [ Normal Learning ]
2 [ Normal Learning ]
3 [ Normal Learning ]
4 [ Normal Learning ]
5 [ Normal Learning ]
6 1 [ Normal Learning ]
7 1 [ Normal Learning ]
8 [ Normal Learning ]
9 1 [ Normal Learning ]
10 [ Normal Learning ]
11 [ Normal Learning ]
12 [ Normal Learning ]
13 3 [ Normal Learning ]
14 3 [ Normal Learning ]
Press Ctrl-N to display choices for additional ports..
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-44. Spanning Tree Port Configuration Screen (1 of 2)
3-112
Spanning Tree Port Configuration
Unit:
Participation
[ 1 ]
Priority Path Cost
-------- ---------
128 10
128 10
128 10
128 10
128 10
128 10
128 10
128 10
128 10
128 10
128 10
128 10
128 10
128 10
Press Ctrl-C to return to Main Menu.
State
----------
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
More...
309978-D Rev 01