Configuring 802.1Q Vlans - Nortel BayStack 450-24T Using Manual

Using the BayStack 450 10/100/1000 Series Switch

Configuring 802.1Q VLANs

To create or modify an 802.1Q VLAN, follow the flowcharts in
Figures E-1 to E-3.
Choose VLAN Configuration (or press v) from the VLAN Configuration Menu
screen to open the VLAN Configuration screen.
A
Select the appropriate PID
value for the PID field.
Is
the PID
user-defined?
Yes
Enter the user-defined
PID value.
Figure E-1. Configuring 802.1Q VLANs (1 of 3)
E-2
VLAN Configuration screen
3
Select the appropriate value
for the Create VLAN field.
Select the appropriate value
for the VLAN Type field.
VLAN Type
Port-Based?
Yes
No
Activate VLAN State.
Start
Is
No
Key
1
A
Off-page reference
On-page reference
BS45047C
309978-D Rev 01