Table 3-25. Port Mirroring Configuration Screen Fields - Nortel BayStack 450-24T Using Manual

Table 3-25 describes the Port Mirroring Configuration screen fields.
Table 3-25. Port Mirroring Configuration Screen Fields
Field
Monitoring Mode
Monitor Unit/Port
Unit/Port X
Unit/Port Y
Address A
309978-D Rev 01
Description
Allows you to select any one of six port-based monitoring modes or any one of five
address-based monitoring modes (see Table 3-26). Selecting any one of the six
port-based modes activates the port X and port Y screen fields, where you can
choose up to two ports to monitor. Selecting any one of the five address-based
modes activates the Address A and Address B screen fields, where you can specify
MAC addresses to monitor.
Default Disabled
Range See Table 3-26
Indicates the port number (of the specified unit) that is designated as the monitor
port.
Default Zero-length string
Range 1 to 8 / 1 to 28 (depending on model type)
Indicates one of the ports (of the specified unit) that will be monitored by the
designated port monitor when one of the port-based monitoring modes is selected.
This port will be monitored according to the value of Port X in the Monitoring Mode
field (see Table 3-26).
Default Zero-length string
Range 1 to 8 / 1 to 28 (depending on model type)
Indicates one of the ports (of the specified unit) that will be monitored by the
designated port monitor when one of the port-based monitoring modes is selected.
When installed as a standalone switch, the screen does not display the (Unit/) field
designation. This port will be monitored according to the value of Port Y in the
Monitoring Mode field (see Table 3-26).
Default Zero-length string
Range 1 to 8 / 1 to 28 (depending on model type)
Indicates the MAC addresses that will be monitored by the designated port monitor
when one of the address-based monitoring modes is selected. This port will be
monitored according to the value of Address A in the selected Monitoring Mode field
(see Table 3-26). Users can enter the MAC address from this screen or from the MAC
Address Table screen. The entry is displayed and can be modified by either screen
(see "MAC Address Table" on page 3-22).
Default 00-00-00-00-00-00 (no MAC address assigned)
Range 00-00-00-00-00-00 to FF-FF-FF-FF-FF-FF
Using the Console Interface
(continued)
3-73