Table 4-3. Software Download Error Codes - Nortel BayStack 450-24T Using Manual

Using the BayStack 450 10/100/1000 Series Switch
Table 4-3. Software Download Error Codes
Error code Description
2001 Download process failed to transmit
packet to other stack units.
2002 TFTP load host failed to respond to ARP
request.
2003 Received image failed CRC check.
2004 The download process has lost
synchronization with the TFTP load
host.
2005 TFTP timeout. The software download
has timed out due to network congestion
or the load host has stopped
responding.
2006 File access error.
2007 Non-data packet received from the
TFTP load host.
2008 Requested software image is too large.
2009 Received image failed CRC check.
2010 No MAC address found in EEPROM.
4-10
Corrective action
Check the stack cable connections, and then
repeat the software download process.
Verify that your TFTP load host is operational
and check that the connectivity between the
switch/stack and the TFTP load host is valid.
Verify that the switch software image is valid (not
corrupted) and repeat the software download
process.
Verify that your TFTP load host is operational,
and then repeat the software download process.
Verify that your TFTP load host is operational,
and then repeat the software download process.
Check that the file name of the software image is
correct, and that the file protection is properly
set for access.
Check that the file name of the software image is
correct.
Check that the file name of the software image is
correct, and that you are accessing the
appropriate software image for your switch.
Verify that the switch software image is valid (not
corrupted) and repeat the software download
process.
Contact the Nortel Networks Technical Solutions
Center.
309978-D Rev 01