Table 3-5. Switch Configuration Menu Options - Nortel BayStack 450-24T Using Manual

Using the BayStack 450 10/100/1000 Series Switch
Table 3-5. Switch Configuration Menu Options
Option
MAC Address Table
MAC Address-Based Security...
EAPOL Security Configuration... Displays the EAPOL Security Configuration screen (see "EAPOL
VLAN Configuration...
Port Configuration...
High Speed Flow Control
Configuration...
MultiLink Trunk Configuration... Displays the MultiLink Trunk Configuration Menu (see "MultiLink Trunk
Port Mirroring Configuration...
3-20
Description
Displays the MAC Address Table screen (see "MAC Address Table" on
page 3-22). This screen allows you to view all MAC addresses and
their associated port or trunk that the switch has learned, or to search
for a particular MAC address (to see if the switch has learned the
address).
Displays the MAC Address Security Configuration Menu (see "MAC
Address-Based Security" on page 3-24). This menu provides the
following options: MAC Address Security Configuration, MAC Address
Security Port Configuration, MAC Address Security Port Lists, and
MAC Address Security Table. This menu allows you to set up your
MAC address-based security for your switch.
Security Configuration" on page 3-40). This screen allows you to
configure your switch for EAPOL security.
Displays the VLAN Configuration Menu (see "VLAN Configuration
Menu" on page 3-44). This menu provides the following options: VLAN
Configuration, VLAN Port Configuration, VLAN Display by Port, and
Traffic Class Configuration. This menu allows you to create and modify
VLANs.
Displays the Port Configuration screen (see "Port Configuration" on
page 3-59). This screen allows you to configure a specific switch port,
all switch ports or, when in a stack configuration, all stack ports.
Appears only when an optional gigabit MDA is installed in the Uplink
Module slot. When the gigabit MDA is installed, selecting this option
displays the High Speed Flow Control Configuration screen (see "High
Speed Flow Control Configuration" on page 3-62).
Configuration" on page 3-64). This menu provides the following
options: MultiLink Trunk Configuration and MultiLink Trunk Utilization.
This menu allows you to create and modify trunks, and to monitor the
bandwidth utilization of configured trunks.
Displays the Port Mirroring Configuration screen (see "Port Mirroring
Configuration" on page 3-71). This screen allows you to designate a
single switch port as a traffic monitor for up to two specified ports or
addresses.
(continued)
309978-D Rev 01