Figure 3-25. Multilink Trunk Configuration Menu; Table 3-22. Multilink Trunk Configuration Menu Options - Nortel BayStack 450-24T Using Manual

Choose MultiLink Trunk Configuration (or press t) from the Switch Configuration
Menu to open the MultiLink Trunk Configuration Menu.
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Press Ctrl-R to return to previous menu.
Figure 3-25. MultiLink Trunk Configuration Menu
Table 3-22 describes the MultiLink Trunk Configuration Menu options.
Table 3-22. MultiLink Trunk Configuration Menu Options
Option
MultiLink Trunk
Configuration...
MultiLink Trunk
Utilization...
Return to Switch
Configuration Menu
309978-D Rev 01
MultiLink Trunk Configuration Menu
MultiLink Trunk Configuration...
MultiLink Trunk Utilization...
Return to Switch Configuration Menu
Description
Displays the MultiLink Trunk Configuration screen (Figure 3-26). This screen
allows you to configure up to six MultiLink trunks within a standalone switch or
within a stack configuration. You can group up to four switch ports to form each
trunk.
Displays the MultiLink Trunk Utilization screen (Figure 3-27 and Figure 3-28).
This screen allows you to monitor the bandwidth utilization of the configured
trunks.
Exits the MultiLink Trunk Configuration Menu and displays the Switch
Configuration Menu.
Using the Console Interface
Press Ctrl-C to return to Main Menu.
3-65