Igmp Configuration; Table 3-28. Igmp Configuration Menu Options - Nortel BayStack 450-24T Using Manual

Table 3-28. IGMP Configuration Menu Options
Option

IGMP Configuration...

Display Multicast Group
Membership...
Return to Switch
Configuration Menu
IGMP Configuration
Figure 3-33 shows an example of the IGMP Configuration screen in a stacked
configuration (when installed as a standalone switch, the screen does not display
the Unit # field designation).
Switch ports 8 and 14 of unit 1, ports 2 and 6 of unit 2, and port 16 of unit 4 are
configured to receive all IP multicast-related traffic. The configured ports are
VLAN port members of VLAN 5, and are called Static Router Ports.
Note: Before configuring your switch for IGMP snooping, see "IGMP
Snooping Configuration Rules" on page 1-73.
Choose IGMP Configuration (or press g) from the IGMP Configuration Menu to
open the IGMP Configuration screen.
309978-D Rev 01
Description
Displays the IGMP Configuration screen (see "IGMP Configuration" following
this table). This screen allows you to set up IGMP configurations.
Displays the Multicast Group Membership screen (see "Multicast Group
Membership" on page 3-83). This screen allows you to view all IP multicast
addresses that are active in the current LAN.
Exits the IGMP Configuration Menu and displays the Switch Configuration
Menu.
Using the Console Interface
3-79