Figure 3-57. Nortel Networks Logo Screen After Resetting To Default Settings - Nortel BayStack 450-24T Using Manual

*******************************************************
* Nortel Networks
* Copyright (c) 1996,2001
* All Rights Reserved
* BayStack 450-24T
* Versions: HW:Revx
*******************************************************
Enter Ctrl-Y to begin.
Figure 3-57. Nortel Networks Logo Screen After Resetting to Default Settings
Note: The Nortel Networks logo screen for your switch will display the
correct model number and the current hardware, firmware, software, and ISVN
versions.
Upon successful completion of the power-up self-tests, the switch is ready for
normal operation.
To access the BayStack 450 main menu, press [Ctrl]-Y.
309978-D Rev 01
FW:Vx.xx SW:vx.x.x.x
Using the Console Interface
*
*
*
*
ISVN:x *
3-135