Trunk Configuration Screen For Switch S4; Figure 1-54. Multilink Trunk Configuration Screen For Switch S4 - Nortel BayStack 450-24T Using Manual

Using the BayStack 450 10/100/1000 Series Switch

Trunk Configuration Screen for Switch S4

As shown in Figure 1-49, switch S4 is set up with one trunk configuration (T5).
This trunk connects directly to switch S1.
As in the previous screen examples, to set up a trunk configuration, choose
MultiLink Trunk Configuration from the MultiLink Trunk Configuration Menu.
Figure 1-54 shows the MultiLink Trunk Configuration screen for switch S4.
Trunk Trunk Members (Unit/Port)
----- ------------------------------- ------------ --------------- ------------
1 [ /5 ][
2 [ / ][
3 [ / ][
4 [ / ][
5 [ / ][
6 [ / ][
Trunk Trunk Name
----- ------------------
1 [ S4:T5 to S1 ]
2 [ Trunk #2 ]
3 [ Trunk #3 ]
4 [ Trunk #4 ]
5 [ Trunk #5 ]
6 [ Trunk #6 ]
Enter text, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.
Figure 1-54. MultiLink Trunk Configuration Screen for Switch S4
1-88
MultiLink Trunk Configuration
/11 ][ / ][ /
/ ][ / ][ /
/ ][ / ][ /
/ ][ / ][ /
/ ][ / ][ /
/ ][ / ][ /
STP Learning
] [ Normal ]
] [ Normal ]
] [ Normal ]
] [ Normal ]
] [ Normal ]
] [ Normal ]
Press Ctrl-C to return to Main Menu.
Trunk Mode Trunk Status
Basic [ Enabled
Basic [ Disabled ]
Basic [ Disabled ]
Basic [ Disabled ]
Basic [ Disabled ]
Basic [ Disabled ]
309978-D Rev 01
]