Nortel BayStack 450-24T Using Manual page 389

Table G-1. Factory Default Settings for the BayStack 450 Switch
CI screen
MultiLink Trunk Configuration
(page 3-64)
MultiLink Trunk Utilization (page 3-68)
Port Mirroring Configuration (page 3-71)
Rate Limiting Configuration (page 3-75)
IGMP Configuration (page 3-79)
Multicast Group Membership (page 3-83) VLAN
309978-D Rev 01
Field
Note: The following two fields only appear when a single Phy
MDA with a separate redundant Phy port is installed.
Preferred Phy
Active Phy
Trunk Members (Unit/Port)
STP Learning
Trunk Mode
Trunk Status
Trunk Name
Traffic Type
Monitoring Mode
Monitor/Unit Port
Unit/Port X
Unit/Port Y
Address A
Address B
Packet Type
Limit
VLAN
Snooping
Proxy
Robust Value
Query Time
Set Router Ports
Static Router Ports
Default Settings
(continued)
Default setting
Right
Read-only field indicating the
operational Phy port (Right,
Left, or None)
Zero-length string
Normal
Basic
Enabled
Trunk #1 to Trunk #6
Rx and Tx
Disabled
Zero-length string
Zero-length string
Zero-length string
00-00-00-00-00-00
(no MAC address assigned)
00-00-00-00-00-00
(no MAC address assigned)
Both
None
1
Enabled
Enabled
2
125 seconds
Version 1
- (for all ports)
1
(continued)
G-5