Figure 3-28. Multilink Trunk Utilization Screen (2 Of 2); Table 3-24. Multilink Trunk Utilization Screen Fields - Nortel BayStack 450-24T Using Manual

Using the BayStack 450 10/100/1000 Series Switch
Trunk Traffic Type
----- -------------
5 [ Rx and Tx ]
6 [ Rx and Tx ]
[ Rx and Tx ]
[ Rx and Tx ]
[ Rx and Tx ]
Press Ctrl-P to display utilization for trunks 1-4.
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-28. MultiLink Trunk Utilization Screen (2 of 2)
Table 3-24 describes the MultiLink Trunk Utilization screen fields.
Table 3-24. MultiLink Trunk Utilization Screen Fields
Field
Trunk
Traffic Type
Unit/Port
3-70
MultiLink Trunk Utilization
Unit/Port
---------
8/22
8/23
3/2
1/2
7/2
5/6
Description
Column header for the read-only fields in this screen. The read-only data displayed in
this column indicates the trunk (1 to 6) that corresponds to the switch ports specified
in the Port field.
Allows you to choose the traffic type to be monitored for percent of bandwidth
utilization (see Range).
Default Rx and Tx
Range Rx and Tx, Rx, Tx
Lists the trunk member ports that correspond to the trunk specified in the Trunk
column. The (Unit/) extension to the Port column name appears only when the switch
(unit) is part of a stack configuration. It indicates that the ports in this row are
associated with the specified unit number configured in the Unit field.
Last 5 Minutes Last 30 Minutes
-------------- ---------------
45.0%
55.0%
65.0%
45.0%
25.0%
75.0%
Press Ctrl-C to return to Main Menu.
Last Hour
---------
35.0% 50.0%
25.0% 70.0%
30.0% 55.0%
50.0% 35.0%
40.0% 50.0%
80.0% 55.0%
(continued)
309978-D Rev 01