206 Chapter 3 Bulk Load Command
OSPF_REXMIT_INT: [OSPF retransmit interval]
OSPF_XMIT_DELAY: [OSPF transmission delay]
OSPF_AUTH: [OSPF Authentication {None/Simple/MD5}]
// NOTE: The following values do not accept the "INHERITED"
//
//
OSPF_PASS: [OSPF Authentication Password]
MD5_PASS: [OSPF MD5 password]
MD5_KEY: [OSPF MD5 Key]
END
Contivity VPN Switch configuration commands
Switch configuration commands allow the administrator to configure switch
attributes such as network definitions, NAT, address pools, filters, automatic
backup, syslog forwarding, SNMP settings, and DHCP servers.
Network definitions
Three bulk load commands are used to manage network definitions:
CREATE_NETWORK
DELETE_NETWORK
MODIFY_NETWORK
311645-A Rev 00
keyword. The OSPF_AUTH value will control the
inheritance of these values.