Setting up the Inter-switch Trunk Configuration For SW1:
To set up the inter-switch trunk configuration, choose Inter-Switch Trunk
Configuration from the MultiLink Trunk Configuration Menu screen
(Figure
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Press Ctrl-R to return to previous menu.
Figure 1-20.
Choosing the Inter-Switch Trunk Configuration screen
The Inter-Switch Trunk Configuration screen opens
893-00992-E
1-20).
MultiLink Trunk Configuration Menu
Inter-Switch Trunk Configuration...
Server Trunk Configuration...
Trunk Utilization...
Return to Switch Configuration Menu
Press Ctrl-C to return to Main Menu.
(Figure
Getting Started
1-21).
1-31