Figure 11 Enter Isdn Information Dialog Box - Nortel BayStack 100-S Install Manual

Figure 11 Enter ISDN Information dialog box

16 Select the switch type for the ISDN connection from the Switch Type list.
Depending on the switch type you choose, one, both, or none of the SPID
number boxes become active.
17 If the SPID number box is active, enter the SPID number(s) provided by your
local telephone company. Otherwise, skip to step 18.
18 Select the connection speed from the Speed list.
Multilink PPP is required to support 112K or 128K multilink capabilities.
Your ISP might not offer multilink PPP; if not, the connection is made using
one channel (56K or 64K). Synchronous PPP is required for 56K or 64K.
19 Click OK.
The Enter Name Server Address dialog box
20 Enter the IP Address of the DNS server provided by your ISP and then
click OK.
A Name Server message box opens prompting you to enter another DNS
server.
Installing the BayStack Instant Internet Management Software Version 7.11
Chapter 3 Installing the Instant Internet software 49
(Figure 7 on page 43) opens.