Installing Tcp/Ip On A Windows 98 Workstation; Installing Tcp/Ip On A Windows Nt Workstation - Nortel BayStack 100-S Install Manual

Installing TCP/IP on a Windows 98 workstation

To install TCP/IP on a Windows 98 workstation:
1 From the Windows Start menu, choose Settings > Control Panel.
2
Double-click the Network icon.
3
In the Configuration tab, click on Add.
4
From the list of items to add, select Protocol.
5
Click Add.
6
From the list of manufacturers, select Microsoft.
7 From the list of protocols, select TCP/IP
8
Click OK.
9
Click Close.

Installing TCP/IP on a Windows NT workstation

To install TCP/IP on a Windows NT workstation:
1
From the Windows Start menu, choose Settings > Control Panel.
2
Double-click the Network icon.
The Network dialog box opens.
3
Click Protocols and then click Add.
The Select Network Protocol dialog box opens.
4
Select the TCP/IP protocol and then click OK.
You are prompted for the location of your NT installation files.
5
Enter the appropriate information and follow any instructions displayed on
your screen.
TCP/IP is added to the list of installed network components.
6 Click Close.
Installing the BayStack Instant Internet Management Software Version 7.11
Appendix B Workstation support 85