Installing The Instant Internet Workstation Software From The Cd - Nortel BayStack 100-S Install Manual

7
Rename the original version of each file.
Note: If either the winsock.dll or wsock32.dll files are in use, the
rename process fails. Instant Internet will be unable to copy the needed
version of these files to your workstation, and you will not be able to run
Instant Internet. If this happens, uninstall Instant Internet
all applications that may be using these files (including virus protectors),
and restart your workstation before you attempt to install the Instant
Internet workstation software again.
8
In the Instant Internet is installed dialog box, click OK.
Users can now use their Web browser to access the Internet through Instant
Internet. If you do not have a Web browser, you can install the latest version of
Netscape Navigator included on the BayStack Instant Internet Software and
Documentation Version 7.11 CD. For details on installing the Web browser, see
Chapter 4, "Documentation, third-party applications, and what to do next," on
page 67.

Installing the Instant Internet workstation software from the CD

To install the Instant Internet workstation software from the CD:
1
Insert the BayStack Instant Internet Software and Documentation Version 7.11
CD into the CD-ROM drive.
The Instant Internet installation dialog box opens
2 Click Install Instant Internet.
3
Enter a destination directory where you want the Instant Internet installation
software to reside.
By default, the first available network drive is displayed. Instant Internet also
provides a default directory name (for example, f:\instinet). You should
change the drive to a local drive.
4
Click OK.
5
Continue with step
administration utilities on this workstation.
Installing the BayStack Instant Internet Management Software Version 7.11
Chapter 3 Installing the Instant Internet software 65
5 on page 64 and select whether or not to install the
(page 73), close
(Figure 2 on page 33).