Figure 10 Ip Address Configuration Utility Dialog Box - Nortel 600 Installing

36 Chapter 3 Configuring the management IP interface
When the IP address configuration utility finds an unconfigured gateway, it
displays a dialog box where you assign the IP address, subnet mask, and
default gateway

Figure 10 IP address configuration utility dialog box

The utility automatically displays the serial number of the first unconfigured
gateway in the dialog box.
4
Assign an appropriate management IP address and subnet mask to the
Contivity 600.
The default gateway address is optional; you can configure it later.
5 Click on Apply to configure the management IP address, subnet mask, and, if
specified, the default gateway on the Contivity 600.
6
Click on Close.
The IP configuration utility dialog box closes.
7
Go to
Contivity 600 from a Web browser.
For detailed information about configuring and managing the Contivity 600, refer
to the documentation on the Contivity software CD.
311862-C Rev 00
(Figure 10).
"Testing the configuration" on page 41 to verify that you can access the