Nortel BayStack 100-S Install Manual page 90

90 Appendix B Workstation support
• In a more complex environment with a router connecting a multiple LANs,
you can put the Instant Internet unit on one LAN, and instruct the router to
direct Internet traffic from the other LAN to the Instant Internet unit.
Workstations already configured with the router as their gateway would not
change.
If you have trouble with the following procedures, refer to your operating
system's documentation.
To configure a Windows 95 or Windows 98 workstation to use Instant Internet as
the gateway and DNS proxy:
1
From the Windows Start menu, choose Settings > Control Panel.
The Control Panel window opens.
2
Double-click the Network icon.
The Network dialog box opens.
3
Select TPC/IP in the list.
4 Click Properties.
The TCP/IP Properties dialog box opens and IP Address is selected. The IP
address and subnet mask boxes are displayed.
5
Click Gateway.
6
In the New gateway box, enter the IP address of the Instant Internet unit's
client-side interface and then click Add.
The IP address is added to the Installed Gateways list.
7
Click DNS Configuration.
8 Select the Enable DNS option.
9 In the DNS Server Search Order box, enter the IP address of the Instant
Internet unit's client-side interface (the same IP address you entered for the
gateway address in step 6), and then click Add.
The IP address is added to the DNS Search Order list.
10 Click OK through all dialog boxes to save the settings.
209226-B