Table of Contents
Advertisement
3.1 Logging in Web Interface
The VGW series is easy to install by following the steps below.
Step 1：Connect a computer to a LAN port on the VGW series. Your PC must be set to 192.168.0.X,
the same domain as that of the VGW series.
Step 2：Start a web browser. To use the user interface, you need a PC with Internet Explorer (version
8 or higher), Firefox, or Safari (for Mac).
Step 3：Enter the default IP address of the VGW series: http://192.168.0.1 into the URL address box.
Step 4：Enter the default user name admin and the default password admin, and then click Login to
enter Web-based user interface.
3.2 Navigation Tree
The web management system of the VGW-X20FS SERIES VoIP gateway consists of the navigation tree
and detailed configuration interfaces.
Choose a node of the navigation tree to enter into a detailed configuration interface.
Note: When the gateway works in the bridge mode, configuration items including "Routing
Configuration" , "DHCP Service", "DMZ Host", "Forward Rules" and "Static Routing" and "ARP" will
not be displayed.
3
Configurations on Web Interface
4-/8-/16-/24-/32-Port SIP Internet Telephony Gateway
20
Advertisement
Table of Contents
