Chapter 4. Applications
Local PVC management can be used at any location that has a
router. Therefore, remote sites can be accessed through the remote
router. One consideration when using local PVC management is
that if the remote router goes down, access to the remote TSU is
lost.
NMS
Minimum Configuration Requirements for Local PVC
Management
The following options are the minimum configuration
requirements for establishing in-band local PVC management.
Once these options are configured, the unit may be accessed using
SNMP/Telnet. All options (with the exception of the M
DLCI option) are found in the S
C
IP Address
Enter the TSU IQ+ IP address.
Management DLCI
Enter a DLCI number (between 16 and 1007) that is not used by the
frame relay service. This option is found in the F
O
-> D
The next five settings are applicable for SNMP access only.
Read Community
Set the R
4-6
Router
Frame
Relay
TSU IQ+
Figure 4-3. Local PVC Management Application
menu.
ONFIGURATION
portion of the D
PTIONS
P
-> N
P
ATA
ORT
X
C
EAD
OMMUNITY
TSU IQ+ User Manual
portion of the
YSTEM
P
C
ATA
ORT
ONFIGURATION
-> FR O
-> M
ORT
PTS
name to match the NMS settings.
Router
TSU IQ+
ANAGEMENT
R
RAME
ELAY
menu (C
ONFIG
DLCI).
GMT
61200275L1-1