To configure the interval time frame, go to the S
C
time you want the history interval to be set for (from 5 to 30
minutes, in five minute intervals). The TSU IQ+ gathers and
displays the information according to the time selected. An
example of a S
shown in Figure 10-2 on page 10-5.
The TSU IQ+ cuts the first gathering session short in order to begin fall-
ing on the selected time boundary. For example: If the unit or the statistics
information was last reset at 12:03 and the History Interval is set for five
minutes, then the first interval session will last only two minutes. There-
fore, the first interval column (i.e., the column farthest to the right if no
columns have been deleted yet) normally represents a time shorter than
the other columns.
View by Day
This view provides historical information for the last seven days
(not including the current day). The most recent information is
displayed on the left. An example of a S
V
The first day's column (i.e., the column furthest to the right) does not rep-
resent a full day's worth of information (unless the unit or the statistics
information was reset at exactly 12 AM).
61200275L1-1
menu under H
ONFIGURATION
TATISTICS
format is shown in Figure 10-3 on page 10-5.
D
IEW BY
AY
TSU IQ+ User Manual
I
ISTORY
NTERVAL
screen in the V
IEW BY
TATISTICS
Chapter 10. Statistics
YSTEM
S
and select the
IZE
I
format is
NTERVAL
screen in the
10-3