Viewing Statistical Information (Front Panel Interface); Dte Port Statistics Available On Front Panel; Control Signal Status Screen; Figure 10-12. Control Signal Status Screen - ADTRAN TSU IQ+ User Manual

VIEWING STATISTICAL INFORMATION (FRONT PANEL
INTERFACE)
Select S
N
statistics. Scroll through the screens using the arrow keys. The
number displayed in the upper right-hand corner of the screen
indicates which port the displayed information applies to (1= DTE,
Network; D= DBU). Statistic counts are running totals for the
current day (i.e., since 12 a.m.).

DTE Port Statistics Available on Front Panel

The following information is displayed when DTE port is selected.

Control Signal Status Screen

An asterisk (*) indicates that the signal is active for the DTE port.
See Figure 10-12.
61200275L1-1
from the M
TATS
, DSX, DBU, DLCI, or S
ETWORK
RS request to send
TR data terminal ready
CS clear to send
CD carrier detect
SR data set ready

Figure 10-12. Control Signal Status Screen

TSU IQ+ User Manual
menu. From this menu, select DTE,
AIN
statistics or reset the
YSTEM
RS TR CS
Chapter 10. Statistics
1
CD SR
* *
10-33