Chapter 9. System Configuration
Subnet Mask
Enter the subnet mask assigned to the LAN that the ethernet card is
attached to. This option is only available if the ethernet card is
installed.
IP Address (IP ADDRESS)
Enter the IP address. The IP address is used when an ethernet
packet is transmitted from the TSU IQ+ to a foreign subnet. This
option is only available if the ethernet card is installed.
Control Port Options (CNTL PORT OPTS)
Set the C
protocol. Set for SLIP or PPP when using the Control port for an
SNMP/TELNET path.
9-2
Figure 9-1. System Configuration Menu
P
M
ONTROL
ORT
ODE
TSU IQ+ User Manual
for T
, SLIP protocol, or PPP
ERMINAL
61200275L1-1