Chapter 7. Configuring the Network Port
History Interval Count (HIST INT COUNT)
Set the number of history intervals to store for statistics. History
intervals are displayed in the V
S
grouped by the interval of time selected in the H
S
page 9-5 for more information. The H
determines how many intervals can be stored at a time. The
maximum value allowed is affected by the M
selection (previously described).
PVC Options (PVC CONFIG)
The information in this menu must be entered for each PVC. DLCI
numbers and their corresponding CIRs are provided by the service
provider.
When configuring PVC options using the front panel, the
Add
mation on front panel operation.
DLCI
Enter the Network DLCI.
Range: 16 to 1007.
DBU DLCI
Enter the far end DLCI for each PVC used for dial backup. Only the
TSU IQ+ that originates the call is required to have this option set.
This selection is only available when a DBU card is installed.
Range: 16 to 1007.
DBU Phone Number
The phone number entry stores the phone number that is used
when the TSU IQ+ triggers auto DBU in case of port or PVC failure.
The phone number should correspond to a location that is
7-6
menus. These views provide data divided into columns
TATISTICS
field. See the section History Interval Size (HST INT SIZE) on
IZE
, and
keys are used. See Operation on page 3-1 for more infor-
Delete
TSU IQ+ User Manual
portions of the
I
IEW BY
NTERVAL
ISTORY
I
ISTORY
NTERVAL
PVC C
AX
I
NTERVAL
C
field
OUNT
OUNT
,
,
Next
Prev
61200275L1-1