Configuring the Network Port
Chapter 7
NETWORK PORT
Access the N
from the C
C
(Terminal Configuration Menu Tree) and Figure 5-3 on page 5-4
(Front Panel Configuration Menu Tree). The
terminates the user end of the frame relay UNI interface. The
TSU IQ+ supports three standard PVC signaling formats: LMI
(gang of four), ANSI T1.617-D (Annex D), and ITU Q.933-A (Annex
A). The selected signaling format is used to poll the network end of
the UNI interface and retrieve virtual circuit information.
Optionally, the polling process can be disabled.
When configuring from a terminal, the screen in Figure 7-1 on page
7-2 will appear when N
In this chapter, the terminal selections are listed first followed by the front
panel selections in parentheses (if the names differ).
61200275L1-1
P
ETWORK
ONFIGURATION
selections are shown in Figure 5-2 on page 5-3
ONFIGURATION
TSU IQ+ User Manual
menus by selecting N
ORT
menu. Full menu trees for the N
P
is selected.
ETWORK
ORT
P
ETWORK
ORT
ETWORK
P
Network
ORT
7-1