Out-of-Band Management
This management option (shown in Figure 4-2) is commonly used
in situations where the customer is trying to reduce the amount of
management traffic flowing through the frame relay device. The
TSU IQ+ can be managed through an established Telnet session or
an SNMP-based network manager like HP OpenView
Netview
The ADTRAN TSU IQ+ MIB is available in the support section of the
ADTRAN Web page at www.adtran.com.
SNMP and Telnet management is provided by one of the following
interfaces:
•
•
•
10BaseT Ethernet
Router
NMS
61200275L1-1
®
, or SunNet Manager
A device (e.g., a router) running SLIP protocol. Connection is
made through the TSU IQ+'s Control port.
A device (e.g., a router) running async PPP protocol.
Connection is made through the TSU IQ+'s Control port.
A LAN. Connection is made through the optional 10BaseT
Ethernet interface provided on the ethernet card (part number
1204005L1).
TSU IQ+
Figure 4-2. Out-of-Band Management Application Example
TSU IQ+ User Manual
®
.
SLIP/PPP
Frame
Relay
TSU IQ+
Chapter 4. Applications
, IBM
®
Router
4-3