Next, you will see the following screen (Figure 3-11).
_______________________________________________________________________________
1 - Remote DLCI
2 - Begin Remote Session
_______________________________________________________________________________
Enter Selection ->
5.
6.
61200275L1-1
Remote Login
0
At the remote DLCI prompt, enter the outgoing DLCI (see
following note) by pressing 1, E
E
(again).
NTER
Next, select B
A R
EGIN
.
E
NTER
When entering the DLCI for a remote application, enter
the DLCI associated with the local unit that you are tel-
netted into (not the far end DLCI).
In this example, if you are telnetted into IQ #1 and choose
REMOTE LOGIN
TSU IQ+ User Manual
Figure 3-11. Remote Login Screen
, the DLCI
NTER
S
by pressing 2 and
EMOTE
ESSION
, the remote DLCI entered would be 16 .
Chapter 3. Operation
ADTRAN TSUIQ+
Telnet
, and
NUMBER
3-13