ADTRAN TSU IQ+ User Manual page 127

Unrouteable
Number of frames received on a dedicated management DLCI with
an IP address that does not match the TSU IQ+ IP address.
If both M
non-applicable. See the section Management DLCI 1 and 2 (DLCI 1 and
2) on page 7-5 for more information.
DSX Port Statistics
Information given is for the
Descriptions of the fields shown on the DSX P
screens follow.
DSX State
Indicates whether the
Interval Remaining
Number of seconds remaining in the current timed interval (only
shown in the V
DSX State Change
Count of state changes for the
DSX UA Time
Time in seconds the
This means that the T1 link is down or in test, or that the frame
relay signaling state is down.
The next four parameters (AIS A
and PLL A
event occurs one or more times for the given interval, the field is active
and A
menu represents information for the entire current day. Therefore, once
an alarm becomes active, it remains active in the first field for the entire
24-hour period.
AIS Alarm
If A
interface one or more times during the given interval. This
indicates that the T1 is out of service.
61200275L1-1
DLCI
ANAGEMENT
DSX-1
I
IEW BY NTERVAL
DSX-1
) are events with two states: active and inactive. If the
LARM
is displayed. The first column of the V
LARM
is displayed, unframed all ones were received on the T1
LARM
TSU IQ+ User Manual
are S , the U
S HARED NROUTEABLE
port since the last reset.
DSX-1
port is currently up or down.
screen).
port.
DSX-1
port is unavailable for data delivery.
, R A
LARM ED LARM
Chapter 10. Statistics
field is
S
ORT TATISTICS
, Y A ,
ELLOW LARM
I
IEW BY NTERVAL
10-15