Table of Contents
Advertisement
Chapter 9. System Configuration
Previous (PREV key on front panel)
Edit the previous entry in the Trap Manager Options table.
Add (ADD key on front panel)
Add a new entry to the Trap Manager Options table.
Delete (DELETE key on front panel)
Delete the current entry in the Trap Manager Options table.
Protocols 1 and 2
These selections allow you to arm the TSU IQ+ to gather statistics
for particular protocols. Select the protocol types most commonly
found on your network. If you have only one type, set P
for that type, and set P
displayed in the L
3 Statistics on page 10-16).
Descriptions for each of the six selections follow:
None
IP
IPx
ARP
SNA
Unknown
9-4
ROTOCOL
3 portion of the S
AYER
Statistics are not gathered for that protocol number.
Statistical information for all IP protocol traffic (both routed
and bridged) is gathered and displayed in the L
portion of the S
TATISTICS
Statistical information for all IPx protocol traffic (both routed
and bridged) is gathered and displayed in the L
portion of the S
TATISTICS
Statistical information for all ARP protocol traffic is gathered
and displayed in the L
menu.
Statistical information for all SNA protocol traffic is gathered
and displayed in the L
menu. All ten SNA types defined in FRF-3 are supported.
Statistical information for all other protocols (not selected in
the other protocol field) is gathered and displayed in the
L
3 portion of the S
AYER
TSU IQ+ User Manual
2 for U
. The information is
NKNOWN
TATISTICS
menu.
menu.
3 portion of the S
AYER
3 portion of the S
AYER
menu.
TATISTICS
1
ROTOCOL
menu (see Layer
3
AYER
3
AYER
TATISTICS
TATISTICS
61200275L1-1
Advertisement
Table of Contents
