Table of Contents
Advertisement
Configuration Overview
Chapter 6
LOCAL AND REMOTE CONFIGURATION
The Express 5210 can be configured and managed locally and
remotely. The unit supports multiple management sessions,
allowing users to access configuration options simultaneously
without interrupting each other's activity.
Configuration Methods
The following configuration methods are supported:
•
•
•
•
61200208L1-1
Configure a local Express 5210 using the front panel or a
VT 100 interface.
Configure a remote Express 5210 using a VT 100 R
session established through a local unit. See the section
Terminal Interface on page 3-1 for information on selecting local
and remote configuration.
Establish a TELNET session which allows you to control an
Express 5210 through the terminal menus (see the section
TELNET Utility on page 4-1 for more information).
Access and control an Express 5210 using an SNMP network
manager (see the section SNMP on page 1-4 for more
information).
Express 5210 User Manual
L
EMOTE
OGIN
6-1
Advertisement
Table of Contents
