Dbu Card Configuration Options; Modem Options; Tone/Pulse; Max Baud Rate - ADTRAN TSU IQ+ User Manual

T1 frame relay performance monitoring tsu with v.35 and dsx-1 ports
Table of Contents

Advertisement

DBU CARD CONFIGURATION OPTIONS

The following selections are dependent upon the type of DBU card
installed (if any). If no card is installed or if the 4-Wire SW56 card is
installed, then the selections in this section do not appear.

Modem Options

The M
installed. The options are described below.

Tone/Pulse

Select the dialing method for the dial backup service.

Max Baud Rate

This sets the maximum rate at which the call will connect.
Choices: 2400, 4800, 7200, 9600, 12000, 14400, 16800, 19200,
21600, 24000, 26400, 28800, 31200, 33600.

Sync/Async

Set to S
is the unit is connecting to an ATLAS.

ISDN Options

The ISDN O
installed. The following options are available:

Switch Type

Select which type of telco CO switch is providing the ISDN service.
There are four options for ISDN switch types:
61200275L1-1
field is available when the V.34 DBU card is
O
ODEM
PTIONS
if the unit is connecting to another IQ unit. Set to A
YNC
field is available when the ISDN DBU card is
PTIONS
L
5ESS
UCENT
DMS100
N
ATIONAL
NEC
TSU IQ+ User Manual
Chapter 8. Configuring DBU Options
SYNC
8-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

1200275l1

Table of Contents