Table of Contents
Advertisement
Configuration Overview
Chapter 5
LOCAL AND REMOTE CONFIGURATION
The TSU IQ+ can be configured locally or communications can be
established so that a local TSU IQ+ can configure a remote TSU IQ+
using a VT 100 interface. See Operation on page 3-1 for information
on selecting L
The C
interfaces or functions of the TSU IQ+ requiring setup:
•
•
•
•
•
The T
5-2.
For detailed information on configuration, see the following
chapters: Data Port Configuration on page 6-1, Configuring the
Network Port on page 7-1, Configuring DBU Options on page 8-1, and
System Configuration on page 9-1.
61200275L1-1
or R
OCAL
EMOTE
menu consists of submenus relating to specific
ONFIGURATION
Data Port
Network Port
Dial Backup (if DBU card is installed)
Control Port (front panel only)
System
C
ERMINAL
ONFIGURATION
TSU IQ+ User Manual
operation.
menu is shown in Figure 5-1 on page
5-1
Advertisement
Table of Contents
